WIFIROBIN SERIES NETWORK PRODUCT - WIFIROBIN.COM

WIFIROBIN SERIES NETWORK PRODUCT

User manual V1.77

Part One:Product Description

The complete packaging includes following:

One 2.4GHz Super wireless terminal

One USB line

One warranty card

Part Two:Product feature

•Meet IEEE802.11b/g standard, use OFDM technique, the actual data rate can be reached as high as 20Mbps or above

•Support 3G wireless router, wireless AP and wireless client server

•Support Bridge and Router mode

•LED screen, automatically search wireless signal , one key connecting.

•No installation of the driver and software are needed.

•Support 54/48/36/24/18/12/9/6M or 11/5.5/2/1M rate adaption

•Support SSID broadcast control and MAC visit address control

•Support 64/128/152 WEP encryption, support WPA.802.1X,TKIP,AES encryption and security mechanisms.

•Built-in firewall, support IP address filtering, domain filtering and MAC address filtering

•Support for UPNP and DDNS dynamic domain function

Device Address

Default IP address: 192.168.4.20

User name: admin

Password: admin.

Part Three

LCD CONFIGURATION

INTERFACE

Turn on the device, connect the antenna, network cable, then plug in, after the power indicator light, LAN light and AIR lighter are on, the ANTCOR welcome screen will be shown.

SCREEN MENU

After you press the button ‘OK’, the menu is displayed as follow,

Device information

As to the device information, please take a look at the software version, IP address. 

Wireless network information

Display the signal strength for the wireless network connecting

Wireless network scan

IVS：

Successful information displayed：

Press ‘OK’ button, it will automatically scan the wireless signals around.

Wait for a while, a list of the information will be searched as follow, 

Above information stands for SSID, encryption method and signal strength

For example, the fourth line, ant stands for SSID, OPN stands for encryption methods, 16 stands for signal strength.

The results    LV7AP：

IVS：

Successful information displayed：

Failure information displayed：

Part FourRestore the factory settings

Select the restoring factory settings, press OK to restore the factory default, the default address is 192.168.4.20, user name: admin, password: admin

Part Five

WEB PAGE CONFIGURATION

Local IP address setting

Choose Network Neighborhood, local area connection properties/General/ Internet (TCP/IP), fill in the IP 192.168.4.XX, see picture below

Login setting

Open IE browser, input 192.168.4.20, click enter button, you will see a window, type the default user name: admin and password: admin, click sure key.

Wireless mode introduction

1. Link setup

Wireless Mode: choose Station

ESSID: click Selection button and choose Station

2. Wireless security setting

Setting steps

1.Set up Main, follow the picture below.

2. Link setup>Wireless Mode>choose Station

3. Network setting> Network Mode: choose Router

Finish booting the device, wait to connect with the router, get your network.

4. Apply changes

5. Restarting:

Finish booting the device, wait to connect with the router, get your network. 

WiFi access points appears SSID “Robin”:

How to change Repeater ESSID

You can change the default name of Repeater ESSID: WFB-XXXX to a name you want on the page Link Setup. This step prevents other people from using the network hacked by wifirobin. We take TENDA network as an example, the network which has been hacked was named WFB-TENDA as default Repeater ESSID but without initial key as the following image:

Well, you must change the name WFB-TENDA to avoid the user of TENDA knowing that his/her network has been hacked. Besides, it is better to set keys by the following steps to keep others from using the hacked network:

Rename Repeater ESSID(here we change it to Robin, you can change to the name you want), enter wpa keys (here we use wifirobin, you can select the keys you like)

Click the button ¨Change¨ at the bottom of the page.

After clicking ¨Change¨, appears at the top of the page, “Configuration contains non-applied changes. Apply these changes?¨ Click ¨Apply.¨

Wait a minute, after wifirobin restarting, setting will be reserved successfully. Then in the list of

Firmware upgrade instruction： network cable

 

1. Go to ‘’ System’’ setup page, see below picture　：

2. Click , you will see the window below：

3. Click ‘’ Browse’’ button, choose the file ‘’ fw.bing’’ that I sent you

4. Open it then click ：

5. Click ，upgrading the firmware.

6.Wait for a couple of minutes untill the device reboots, then succeed in upgrading.

Pay attention to below two points： 

1）Do not change the file name ‘fw.bin’, leave as it is.

2）During the firmware upgrading, make sure wifirobin has power, don’t cut the power supply and make sure to connect to the 。

After rebooting the device, now do a simple operation on wifirobin LED screen, choose ‘‘factory reset’’ option, wait for some seconds, reboot it again. Upgrade succeeded.